Where quality is a habit...

Did you know how V3D Wheel Alignment saves you on cost?

Have you seen the world class workshop that maintains your car to perfection?

Click here to know more


Don't get left out!

Join today...


 

Car Lingo | Good Driving Habits | Safe Driving Tips | Fuel Tips | Maintenance Tips |
Maintenance Tips ::::::

Under the hood:


For Cheking Engine Oil:

Removing oil dipstick

01 Get your car on a level surface and when the engine is cold.

02 Remove the oil dipstick by pulling on the knob.

03 Wipe off the end with a clean cloth to see the upper and lower mark.

Cheking oil level

04 Push the stick back into the tube until it seats fully and then pull it out again to see the oil level.

05 It should be between the upper and lower mark.

06 If oil is below the lower mark, take the car to your service centre for corrective actions.

07 Oil should be light in colour, feel smooth & free. If it is very dark, thick, foamy or has a strong smell of petrol, take the car to the workshop.

Cheking oil quality

Checking brake fluid level

For Cheking Brake Fluid:

01 Visually check level.

02 If level is close to low or below it top up.

03 Caution, brake fluid is harmful to the eyes.

Checking inside wheels and tyres

04 Have a look at the inner side of the wheels and tyres to notice any oil leakage.

05 If present, the wheel cylinders may be leaking, have it checked out at the workshop.

 

 



For Cheking Windshield Washer Fluid:

Fill water or solution here...

01 Top up as required with either clear water or with commercially available washer soap solution.

02 Never run the washer without water, as this will damage the pump, wiper blades and windshield.


For Cheking Coolant:

When engine is hot...
Coolant levels top & bottom

01 Do not open radiator cap when engine is hot.

02 Coolant reservoir cap can be opened.

03 Inspect level of coolant in reservoir, top up if low.


 


© Millennium Mobility Pvt. Ltd, Pune India